..it is spotty at best, but then again San ( Dale ) said the numbers well speak for them - selves..reading between the lines, one has to keep in mind how San projects certain areas and possibly leading to larger finds. Ex,... look at these chip samples from March as they tell of a massive gold find , yes drilling well prove it up, but San can take her time and anounce the whole area at the same time. Companies , knowing their sitting on a large ore body well do their best to stay under the radar and build share holder value..Chip samples ,

Chip sample face averages are also presented by zone using uncut assay values and a 103 g/tonne (3 oz/ton) cutting factor for all individual assays that lie over that threshold.

Zone Vein Width Vein Grade (g/tonne) Face Width Face Grade (g/tonne) Strike Length

(meters) uncut cut (meters) uncut cut (meters)

730 3.1 42.8 26.1 4.6 29.5 18.2 76.2

(007 East)

720 1.9 29.1 14.1 3.5 17.1 8.2 91.5

(007 mid)

700 1.5 60.3 24.3 3.4 27.4 11.6 76.2

(007 main)

Average 2.2 43.1 21.0 3.8 24.2 12.0

Ninety-two development faces were chip sampled resulting in a total of 458 samples assayed for gold with individual values ranging from 0.34 g/tonne (0.01 oz/ton) to 1,163 g/tonne (33.96 oz/ton). Level development continues in both the east and west directions as well as in numerous vein offshoots while incline and decline development is ongoing in order to access the zones at levels above and below the 250 meter (820 foot) level. Drilling from underground and surface continues over 100 meters to the east of this development along strike from the 007 East Zone and down dip from the Emperor Zone. .....Long On The Greens. Traps7