Vee, I have just double checked, all the coordinates are correct ON ALL PAGES in the technical report. The problem lies with google earth itself and UTM coordinates, this link may explain what is going on, it looks as though the further you get away from the equator, the greater the change . I am not up on these type of corrections;

http://gauss2.gge.unb.ca/papers.pdf/gpsworld.february98.pdf

I have also used the 2008 tech report for reference to the position of the C-1 Vein/adit. All info on positioning that I have checked from St Elias, matches up, therefore it lies between the presentation coordinates and/or google earth.

I have also replotted the C-1 Adit to L5750N of the Titan images, found on page 193 of the 2010 technical report. It lies on the 1100m mark and decends to the lower right following through the T-24 target, just exactly like Hog had the adit plotted on the slide before.

And to be honest, without the actual collar UTM coordinates and the right corrections to google earth, there is nothing that we can do to see exactlty where they drilled and match these up. If they ever give us a drill plan with the actual written coordinates and adjustments, then we will know we can trust it and plot it onto the actual Titan slides ourselves. Until then, we cannot place these and verify the Quantec slides.