Welcome To the WIN!!! St. Elias Mines HUB On AGORACOM
Keep in mind, the opinions on this site are for the most part speculation and are not necessarily the opinions of the company WITHOUT PREJUDICE
Message: we say.....
..... that the drills will speak. But, I say, the technical report matched up with the 2d images, pretty well tells it all to me. I just spent the last few hours going over our technical report a little more meticulously. With a tip, from Mrs Cramer, quite the lady, I might add, I decided to follow up on it.
I looked at the grades stated in their applicable areas on the cross section pages, 251 and 252. Here are the pages:
SLI - Map...pdf
Download(196.5 KB)
Notice there are historic and 2010 samples. The best thing to look at is pg 251, to see what I am trying to say. If you were to drill one 100 m hole there following the high grade circles, you would probably have 100m AVERAGING CLOSE TO AN OUNCE OF GOLD PER TON. Ladies and gentlemen, that would be one extraordinary hole!!! On pg 252, on the a-4 vein you could have did the same, you cant tell it now because the high grade gold that was in the STOPE area of this diagram has been already mined . You would have only put a 60 m hole here, because thats all we got data for now. BUT WAIT! By matching up this page with the titan 2d images, I was able to see on the images where the resitivity faded out below the maximum depth of this page. THEN, at 300m, I see the top of a huge anomoly with the same sort of signature .
Im no geo, but after going through the report again, I only convinced myself further that this IS gold in these anomalies, and possibly with HIGHER grades that we have seen yet. It is also my beleif that our greatest grades will come from the deeper anomalies EAST of the main structure. And , IF my interpretation of the data is correct, then we will find new high grade near surface gold on places of the property that we havent sampled yet.
BOW2U, you thought your numbers were high, YOU WOULDNT WANT TO SEE MINE!
3 Recommendations
Loading...
Loading...
New Message
Please
login
to post a reply