Hello Justone,

I cut this from you previous post.

"When reviewing the TTM last results I noticed they abandoned a hole because of "occasional barren dikes".

and this

"..... was told by an even more prominent individual in the Moly world that this fact would hurt TTM's chances of being bought out by TCM."

I checked TTQ's new release on Oct 28, 07 and found this.

"HOLE CHU E002 was drilled at an azimuth of 205 degrees and a dip of -58 degrees and collared some 35 meters east of previously reported CHU 06-05 (0.089% Mo over 152.4 meters) to extend the EAST high grade zone to the southeast. The hole encountered occasional barren dikes, resulting in a broader lower grade interval of 0.057 % Mo over 318.1 meters from 100.4 meters to 418.5 meters."

and this

"HOLE CHU W002 was abandoned at 23.35 meters due to  extensive deviation and was not assayed."

 So, it was CHU E002 that encountered occasional barren dikes. They did not abandon the hole.

They abandoned Hole CHU W002 actually.

I hope it clarifies everything.

Good luck to all.