Good results from SGX
posted on
Mar 18, 2013 05:14PM
San Gold Corporation - one of Canada's most exciting new exploration companies and gold producers.
SGX Resources drills 14.1 m of 20.1 g/t Au at Tully
Ticker Symbol: C:SXR C:SGR
SGX Resources drills 14.1 m of 20.1 g/t Au at Tully
SGX Resources Inc (C:SXR)
Shares Issued 126,559,169
Last Close 3/15/2013 $0.12
Monday March 18 2013 - News Release
Also San Gold Corp (C:SGR) News Release
Mr. Dale Ginn of SGX reports
SGX RESOURCES DRILLS MULTIPLE GOLD ZONES AT TULLY
Drilling in and around SGX Resources Inc.'s Tully gold deposit located 25 kilometres north of Timmins has been successful in identifying numerous sets of gold-bearing veins of varying grades and thickness. The following results are the first received from the joint (50/50) SGX/San Gold (TSX:SGR) 2013 program following extensive compilation and reinterpretation of past drilling programs by previous owners dating back to the discovery of the Tully deposit in 1969 by McIntyre Mines. Drill hole #13-15 cut four separate zones including 14.1 metres of 20.1 g/tonne (uncut) as well as 13.0 metres of 5.9 g/tonne, all above 230 metres in depth below surface. New, broadly mineralized zones of up to 50 metres in width were also encountered by drill holes #13-12 and #13-17.
Recently received results from four drill holes are summarized below: Gold Hole # From (m) To (m) Length (m) (g/tonne) Zone/Lens SGX-13-12 56.5 65.0 8.5 1.97 New and 157.8 160.8 3.0 7.14 T1 and 175.1 177.0 1.9 7.46 T2 and 189.4 192.0 2.6 5.45 T3 and 229.8 270.0 40.2 1.09 New SGX-13-14 130.3 134.3 4.0 6.47 T1 and 159.5 163.0 3.5 3.50 T2 SGX-13-15 181.0 194.0 13.0 5.89 T2 and 247.3 261.4 14.1 20.10 T3 including 247.3 254.3 7.0 39.00 T3 including 247.3 247.8 0.5 452.0 T3 and 346.3 348.0 1.7 4.70 New and 372.0 381.0 9.0 1.15 New SGX-13-17 149.0 151.2 2.2 8.87 T1 and 155.8 166.1 10.3 1.12 New and 171.0 176.0 5.0 5.45 T2 and 224.0 273.3 49.3 1.10 New
During the latter part of 2012 an internal study was undertaken focusing on the structural and geological setting in order to fully appreciate the potential for additional mineralization and its controls. What resulted is a different interpretation of vein geometry than past operators giving rise to a new exploration program consisting of steeply oriented drilling in order to intersect veining at perpendicular angles and to utilize drill footage more efficiently by intersecting numerous vein sets. In general terms, the Tully deposit is now interpreted to be a series of shallow dipping (extensional or ladder) stacked vein sets within a subvertical competent mafic tuff host that is bounded by ultramafic volcanic rocks to the south and sediments to the north. This host sequence of rocks all lie within the regional east-west Pipestone Fault corridor, a northern splay from the Porcupine-Destor Fault. Movement along this fault corridor gave rise to competence contrast in the tuff unit, allowing for dilation and the formation of extension fractures which became repositories for gold bearing hydrothermal fluids. The Tully deposit has been drilled over a 600 metre strike length to date, and to depths of over 200 metres, remaining open along strike and to depth. True intersection widths are interpreted to be between 65% to 80% of drilled widths as shown in the table above. Assay intersections are uncut as an appropriate cutting factor has not yet been determined for this deposit.
SGX Resources is undertaking drilling programs on the Edleston Zone, located 60 km south of Timmins with two drills focusing on infill and extensions, as well drilling is underway on the Tully gold deposit located 25 kilometers north of Timmins while an additional drill has started on the Grenfel project located west of Kirkland Lake in order to follow up on historical shaft, level development and diamond drilling by previous owners. It is anticipated that mineral resources technical reports will be prepared this year for the Edleston and Tully deposits. SGX also holds a position in the Davidson-Tisdale deposit and other strategic lands to the west and south of Timmins, near current and past production.
Sections, plans and diagrams related to this press release are available at the company's website, www.sgxresources.com, specifically a composite/longitudinal section showing the location of the intersections received and released to date.
This program was carried out under the supervision of Peter Caldbick, P.Geo., of SGX Resources Inc., the qualified person responsible for this news release. The drill core was split, with half sent to Activation Labs of Ancaster, ON and fire assayed with an AA and gravimetric finish. Whole metallic assays were performed on samples containing visible gold. Check assays were also performed on pulps and rejects, as well, blanks and standards were inserted into the sample stream.
A copy of this press release will be made available on the company's website and will be filed with SEDAR.
We seek Safe Harbor.
© 2013 Canjex Publishing Ltd.