No such message found

Welcome to the San Gold HUB on AGORACOM

San Gold Corporation - one of Canada's most exciting new exploration companies and gold producers.

Free
Message: Re: cut & fill...
2
Feb 21, 2009 12:58PM
5
Feb 21, 2009 03:01PM
5
Feb 21, 2009 03:33PM

Feb 21, 2009 06:11PM
2
Feb 22, 2009 11:58AM
5
Feb 22, 2009 01:23PM
5
Feb 22, 2009 07:44PM
2
Feb 22, 2009 07:50PM

RM, I agree Dale said that the Rock in the San Antonio was the hardest around and screening and back filling was not required. I am curious to your thoughts here on what happened here. ( down. In

the lower area of the Rice Lake Mine, we looked at the 4605-96E a LH stope where the HW

collapsed, fortunately after most of the broken ore had been removed. Although the 96 vein

has been reasonable stable at higher levels, this stope had been opened over a length of 140’

which was probably too great a span )..Would we require a different attack on these new wide veins down below, is it possible we are seeing different geology or just because the ore is richer and these veins are wider. What will happen with SGI as they had a high Strip Ratio.

Longhole – This method is used where the ore zone is wide and dips fairly steeply. It was the

method used at the SG-1 mine, but it is not selective, and when the entire quartz vein must

be taken and the country rock is heavily sheared, there can be signifi cant dilution, which happened

at SG#1, where the grade dropped to about 0.08 oz/ton before it was shut down,Thanks. Long on the Greens Traps7

1
Feb 23, 2009 06:03AM
6
Feb 23, 2009 06:52AM
1
Feb 23, 2009 07:07AM
3
Feb 23, 2009 07:51AM

Feb 23, 2009 10:14AM
3
Feb 23, 2009 02:18PM
1
Feb 23, 2009 02:53PM

Feb 23, 2009 03:59PM
1
Feb 23, 2009 05:27PM
3
Feb 23, 2009 08:00PM

Feb 24, 2009 06:01AM
2
Feb 24, 2009 08:11AM
3
Feb 24, 2009 02:10PM
3
Feb 24, 2009 02:40PM

Feb 24, 2009 03:33PM
2
Feb 24, 2009 08:22PM
1
Feb 24, 2009 09:00PM
1
Feb 25, 2009 04:28AM
1
Feb 25, 2009 07:38AM
5
Feb 25, 2009 08:52AM
2
Feb 25, 2009 09:53AM
2
Feb 25, 2009 10:03AM
6
Feb 25, 2009 12:16PM

Feb 26, 2009 10:53AM
5
Feb 26, 2009 01:32PM
Share
New Message
Please login to post a reply