No such message found

Welcome to the San Gold HUB on AGORACOM

San Gold Corporation - one of Canada's most exciting new exploration companies and gold producers.

Free
Message: I'm With You Deliverator...Let's Have A Contest

...SEVEN...COME ELEVEN

posted on Feb 02, 2009 03:31PM

The Wingold veins are located approximately 300 meters to the north and east of the Hinge #4 deposit and were partially developed by 2 levels with shaft access in the early 1930's. A limited drill program from surface was conducted by San Gold Resources in 2004 prior to the development of the current Hinge geological model...we also know that the Wingold vein runs parallel to the Sam norm in an East WEST direction and was previously drilled down at the 1500 ft level and showed over 1 0z /ton. We also know from pg 182 of the 2004 ACA Howe report that we have seven huge veins down at the 5500 foot level with the largest vein heading in a North West direction and several heading North East. We also know Dale traced the + 4 hinge back to the main shaft at the 5500 level so lets find the other six, yrs from now when were drilling down at the 8000 to 10,000 foot level we may repeat the 24 oz / ton Goldcorp is currently finding. We know San will keep finding high grade as we follow this East West direction as Bill is touting possibly eleven veins and just an example what to expect when we cross Sans border,,, Grab samples of up to 240 g/tonne (7 oz/ton) gold were reported in the Northern Miner (June 30, 1938). Assays ranged from 0.69 g/tonne (0.02 oz/ton) to 292.00 g/tonne (8.51 oz/ton) gold from channel and diamond drill samples. I also know i will get sheet for this,,search:: Bissett Manitoba, and the satalite will zoom in on Bissett, then move your cursor slowly over the area just North , West and line up longitude 95degree at 45 and latitude 51 degree 05 and one will see these numbers displayed on the bottom of image. Once you line up this area you will have found where over 6 oz per ton was found and if you contiue East back towards our hinge +. 4 then you just went over the jackpot. ACA Howe used this area in comparison to help do Sans 43-101 report. Long on the Greens Traps7..Dale has not given us cross section of drill core, but cubing your numbers and dividing by 11.5 cu ft x oz will give one a good ruf,ruf ruf calculation.

Share
New Message
Please login to post a reply