Surething Re: Kian's 43-101
I must say I am pleased there are indeed some shareholders reading my posts here. At times it feels like I am the only investor on the stock board. Again like the earlier post which caught my typo on the ISM claim number, thanks for pointing out a possible source of confusion for anyone who may have indeed been following up on the quoted post.
**********************************************************************
From the ISM website, here is the link to the report
http://www.inspirationmining.com/news.html?id=113
Here is the link to the PDF report I referred to. I also have it saved on my own PC for reference when need be.
http://www.inspirationmining.com//files/inspirationtechreport.pdf
As far as I know, and still see it now in the same manner, the exploration hole drilling assays come up on my Adobe reader/s as showing a file having 228 pages which is displayed in the uppermost task/tool bar. The table in question shows as being on page 228 of 228 on my "reader". I see now that in looking closer, the actual written page that has evaded you, is numbered as 226. Yet at the top of my Adobe reader, it shows as page 228 of 228.
"See page 228 of Kian's 43-101 for the table showing the assays of the exploration drill holes."
http://agoracom.com/ir/Inspiration/forums/discussion/topics/475676-whats-not-to-like/messages/1535665#message
or as I had posted in full:
"Exploration drill holes IMCEX 23 (48M or .56% and 10M of 1.58%) and 52 (25 M of 1.44%) had some pretty decent results albeit a little deep. Note the location in proximity of these two holes
See page 228 of Kian's 43-101 for the table showing the assays of the exploration drill holes."
So you did not actually see the "table of assays" or anything of the sort as described in my post? Sorry for the lack of a link, but you should have noticed that the table on "page 226" staring you in the face is in fact a "table showing assays of the exploration drill holes". If that still had you confused, it is afterall in the 43-101 authored by Kian Jensen ISM's Geo at the time. Or as I call it "Kian's 43-101"
To be very clear, here is how the table is labelled:
Appendix P: Assay Composites for Exploration Diamond Drilling
If you actually care for the details, it can be found in Appendix P and to lessen any possible future confusion, it's on the very last page of Kian's lengthy 43-101, which was released Oct 06/2009 to the ISM website and which actually displays as "update as of September 01/2009' It also has been dated September 25/2009 on the same first page
As you already know, the holes I thought were interesting in our new KCC Allerston grid are exploration holes 23 and 52
I have added the % and M. to the appropriate numbers as I think it will not paste well here compared to the original table
Drill Hole From (m) To (m) Length (m) Weighted Average Ni (%)
IMCEX-23 273.00 321.80 48.80M 0.560%
IMCEX-52 346.00 371.42 25.42M 1.449%
While we are on topic, here's the ISM map that goes with the table for that the time
http://www.inspirationmining.com//files/116.pdf
BTW, The first page I see reads like this:
TECHNICAL REPORT OF THE
LANGMUIR PROPERTY
SHAW DOME AREA
NTS 42N/06
In
LANGMUIR TOWNSHIP
PORCUPINE MINING DIVISION
DISTRICT OF COCHRANE
ONTARIO, CANADA
FOR
INSPIRATION MINING CORPORATION
An Update as of September 1, 2009
Kian A. Jensen, B.Sc., P.Geo.
Timmins, Ontario
September 25, 2009
