Here is a review of predictions compared to results:

Hole 174:

The collar location was to the east of 171 and parallel to it. Collar is still within T1 and going towards T2. This again is infill drilling and I would expect good results.

BD2011-174   23   25         2    2.24
BD2011-174  106  107         1    2.97
BD2011-174  221  253        32    2.01
BD2011-174  266  267         1    2.33
BD2011-174  406  431        25    3.08

Nothing to be dissapointed here with!  Grades better with depth.

Hole 175:

Collar location is above T2, east of T1 going into T2. This again is a fairly long hole that should hit T2 fairly well but would extend T2 to the South East and at depth if they hit in the deeper section of the hole. For the first 200m or so, this is infill drilling so expect good numbers in the top half of the hole.

BD2011-175  158  203        45    1.20
Including   168  174         6    1.64
Including   176  183         7    2.00
Including   187  193         6    1.29
Including   196  203         7    2.59

We hit well in the first 200m as I predicted but no bonus at depth here;(  

Grade improves with depth.

Hole 176:

Collar location is further east of 175, over T2, long and steep. Again infill drilling of T2, I expect decent numbers here.

BD2011-176  257  284        27    1.69
Including   257  258         1    5.81
Including   274  275         1   35.60

Nothing dissapointing here again.  Notice the better grades again at depth!

Hole 177:

Collar location was at the top of T1. This is a fairly shallow hole with moderate dip important for the resource estimate and infill drilling again. I expect good results here.

BD2011-177   52   59         7    1.68
Including    52   56         4    2.16
BD2011-177  150  171        21    0.72
Including   160  162         2    2.94

This holes was a little dissapointing since it was on the top of T1 but still not a bad hole.

SGS putting all these results in a 3D model is what will be important here.  Without 

seeing what this looks like in 3D, it is hard to know what this ore body does under-

ground.  One thing for sure, we keep getting economical grades over very good widths

and that bodes well for our 43-101 RE.

Glorieux