From 20101 Drilling, significant intersections:

Snow White:

Hole 117: 255.0 289.0 34.0 3.68 88 B Zone

Hole 140: 284.0 294.0 10.0 1.22 88 A Zone

T1/2

Hole 115: 100.0 112.0 12.0 6.10 T2A

Hole 119: 167.0 174.0 7.0 4.84 T2A

Hole 124: 167.0 194.0 27.0 2.47 T1 Zone

Hole 125: 222.0 232.0 10.0 7.57 T2 B Zone

Hole 132: 298.0 301.0 3.0 4.63 T2 A Zone

Hole 134: 371.0 380.0 9.0 9.05 T2 A Zone

From 2011:

Hole 157: 333.0 339.0 6.0 10.13 T2 A Zone

Hole 157: 354.0 358.0 4.0 10.27 T2 A Zone

Hole 158: 349 373 24 1.14 T2 A Zone

Hole 158: 385 393 8 1.64 T2 A Zone

Hole 159: 281 290 9 3.13 T2 B Zone

Hole 164: 377 383 6 1.47 T1 Zone

Hole 164: 431 446 15 7.64 T1 Zone

Hole 162: 209 222 13 7.01 88 Zone

Hole 162: 232 250 18 1.47 88 Zone

Hole 163: 313 319 6 2.16 T2 B Zone

Hole 166: 353 385 32 1.29 T2 B Zone

Hole 167: 282 297 15 1.50 T2 Zone

Hole 167: 329 335 6 1.25 T2 Zone

Hole 167: 374 380 6 1024 T2 Zone

These are the most significant drill results I have found since January 2010 at depth. There are certainly some very good results and some more average results at depth but the grades on average certainly seem higher with some bonanza grades in a few holes.

Holes 164 and 157 are drilled in the same direction and are one on top of each other, but offset in their collar location and they both have good grades at depth: 10.13, 10.27 and 7.64 g/t indicating that there is a good grade section here. It would be interesting to get a hole coming from the south and intesecting this same area.

Hole 166 and 167 started in the 88 zone and were drilled towards T2 and intersected mineralization under T2. Vertically, that SUPER rich section was 287m down assuming the hole was straight of course.

Looking at the upcoming results, we have

Hole 168: Parallel to 167 but to the west of it, this hole was only 151m long. I suspect they ran into problems with the hole as it never reached under T2 which probably was their target. I do not expect much here.

Hole 169: Collared to the south of the eastern edge of T2, this hole was probably designed to test the eastern limit of the deposit. I do not expect much here but a good hit here would be great news as it would increase our mineralized envelop dramatically again.

Hole 170: This hole is collared over T1 and is a near vertical hole with a dip of 81 degrees and drilled to intersect deep under T2. This hole is at least 426m deep. It is within the mineralized envelop and so I would expect some good values from this hole.

Hole 171: This hole is collared over T1 to the east of hole 170. This hole again is going thru the mineralized envelop and I would expect some decent intercepts here as well.

I will be curious as to how important people feel about knowing what to expect with the next set of assays. The company is now feeding us regular assay results of 3-4 holes at a time and I think it is nice to know ahead of time what to expect but that could be just me. If you feel this is important, please give a thumbs up. If you do not think this is useful, please ignore the thumbs up. Based on responses, I will decide if I keep this kind of post up.

Glorieux