World Class Location with Significant Discovery Potential for Copper

Developing the Muskwa Copper Project in Northern British Columbia + Reports 23.40% Copper on South Extension of Eagle Creek Copper Occurrence

Sponsored
Message: Fabled Copper Reports Values as High as 15.55% Copper on East Extension of the Eagle Creek Copper Occurrence

Fabled Copper Reports Values as High as 15.55% Copper on East Extension of the Eagle Creek Copper Occurrence

posted on Mar 01, 2023 07:41AM

Fabled Copper Corp. ("Fabled Copper" or the "Company") (CSE:FABL)(FSE:XZ7) announces the results of 2022 surface field work on its Muskwa Copper Project. See Figure 1 below.

Figure 1 - General Property Location

 

The Project is comprised of the Neil Property, the Toro Property and the Bronson Property all located in northern British Columbia. See Figure 2 below.

Figure 2 - Location Map

 

The eastern extension of the Eagle Creek copper occurrence is located on the Neil Property roughly 1.5 km east of the 6400 Eagle Vein adit where the 2022 underground LIDAR survey was completed. The Eagle creek flows northward into the Yedhe Creek and it is located in the same valley that contains the eastern end of the 6400 adit & Eagle Vein exposure that are located on the west cliff face of the valley. During the summer of 2022 the Eagle Creek (See Release dated February 7, 2023), east extension of the Eagle Creek copper occurrence, the western extension, north extension, southern extension and the backside of the Eagle vein were visited on sperate occasions.

This release pertains to the eastern extension of the Eagle Creek Copper occurrence site visit, see Figure 3 below.

Figure 3 - Eagle Creek Copper Occurrence Location

 

Peter Hawley, President, CEO reports; "The eastern extension of the Eagle Creek copper occurrence was visited by a 2-person field team consisting of a geologist and geo technician on two occasions during the summer field season. A total of 10 samples were collected, all float samples. Of the 10 samples collected, 3 assayed greater than 0.5% copper. See Table 1 below.

Over the course of two site visits a vertical altitude of 335 meters was examined and 10 float samples were collected, three of which assayed greater that 0.50% copper. See Photo 1 below.

Photo 1 - East Eagle Creek Exposed Veining over 335 meters vertically, note folding

 

Float sample D-723607 taken at the 1,557-meter elevation consisted of semi massive sulphides with quartz, minor carbonate, abundant azurite and malachite copper alteration with 60% chalcopyrite and 35% quartz. This sample returned an impressive 15.55% copper. See Table 1 and Photo 1, below.

Photo 1 - Sample D-723607 - 15.55 % copper.

 

At the 1,307 meter altitude float sample D-723612 which consisted of vuggy quartz veining with minor patches of minor carbonate and iron carbonate contained abundant malachite copper alteration with 8% chalcopyrite as patched and disseminations and returned 6.14% copper. See Table 1, Photo 2 below

Photo 2 - Sample D-723612 - 15.55 % copper.

 

Table 1- East Extension of Eagle Creek Occurrence Sample Results

Sample No.

Elevation

(m)

Copper

%

Sample Type

D-723607

1,579

15.55

Float

D-723608

1,558

0.03

Float

D-723609

1,524

0.41

Float

D-723611

1,407

0.04

Float

D-723612

1,307

6.14

Float

D-723613

1,478

1.09

Float

D-723614

1,665

0.45

Float

D-723692

1,599

0.24

Float

D-723693

1,641

0.03

Float

D-723695

1,607

0.01

Float

  • 1% copper = 22.2 pounds

As per protocol, all sample locations were taken with GPS along with GPS enabled field cameras of photos of the sampled units. The photos, sample locations and all assay data pertaining to the assay taken, (36 elements were assayed) were tagged in a geo tag format for plotting in .kml / .kmz GIS systems such as Google Earth. See Photo 3 below

Photo 3 - Geotagging sample / photo location

 

An additional releases on the 2022 exploration program of the Muskwa area will be forth coming in the following weeks.

QA QC Procedure

Analytical results of sampling reported by Fabled Copper Corp represent rock samples submitted by Fabled Copper Corp staff directly to ALS Chemex, Vancouver, British Columbia Canada. Samples were crushed, split, and pulverized as per ALS Chemex method PREP-31, then analyzed for ME-ICP61 33 element package by four acid digestion with ICP-AES Finish. ME-GRA21 method for Au and Ag by fire assay and gravimetric finish, 30g nominal sample weight.

Over Limit Methods

For samples triggering precious metal over-limit thresholds of 10 g/t Au or 100 g/t Ag, the following is being used:

Au-GRA21 Au by fire assay and gravimetric finish with 30 g sample.

Ag-GRA21 Ag by fire assay and gravimetric finish.

Fabled Copper Corp. monitors QA/QC using commercially sourced standards and locally sourced blank materials inserted within the sample sequence at regular intervals.

About Fabled Copper Corp.

Fabled Copper is a junior mining exploration company. Its current focus is to creating value for stakeholders through the exploration and development of its existing copper properties located in northern British Columbia. The Muskwa Project is located in the Liard Mining Division in northern British Columbia.

Mr. Peter J. Hawley, President and C.E.O.
Fabled Copper Corp.
Phone: (819) 316-0919
peter@fabledcopper.org

For further information please contact:

info@fabledcopper.org

Share
New Message
Please login to post a reply