Finisar FTLX8571D3BCL Duplex SFP+. Finisar's 10GBASE-SR/SW Ethernet transceiver is rated for distances up to 300m with a maximum bandwidth of 10Gbps. The FTLX8571D3BCL SFP+ operates at a wavelength of 850nm.

10Gb/s 850nm Multimode Datacom SFP+ Transceiver. Finisar's FTLX8571D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.

Features
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support)
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0°C to 70°C
Single 3.3V power supply
Maximum link length of 300m on 2000 MHz-km MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions

Applications
10GBASE-SR/SW 10G Ethernet
1200-Mx-SN-I 10G Fibre Channel

Specifications
Form Factor：SFP+
Distance：300 km
Protocol：
10 Gb/s Fibre Channel Compliant
10 Gigabit Ethernet Compliant
Data Rate (max)：10.5 Gb/s
Low End Case Temperature (°C)：0°C
High End Case Temperature (°C)：70°C
Diagnostics：Digital
Transmitter：VCSEL
Receiver：PIN
Voltage Supply：3.3
Connector：LC

As a professional manufacturer of fiber optic equipment, Ingellen also committed to providing a full range of Finisar transceiver to all, such as Finisar SFP transceivers, Finisar X2 transceivers, Finisar XENPAK transceivers, Finisar XFP transceivers, Finisar SFP+ transceivers and Finisar GBIC transceivers. All of the products are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition.