Look at these results and look at this picture....yet Elmers says ''if we are successful'' lol....yeah right. And keep in mind East is the stronger side, should have better grades.

Teck will have 4 drills on the East....

http://www.copperfoxmetals.com/s/Image.asp?i=maps/Cu_Model_Plan_View_810m_El.JPG&id=467060

July 26 2011

Hole 407:

(0.69% copper equivalent) over a core interval of 519.2m from 5.3m to a depth of 524.47m.

(1.18% copper equivalent) over an interval of 160.36m starting at a core length of 264.2m.

The mineralized interval in DDH CF407-2011 is open to the east and confirms the mineralized nature of the chargeability anomaly

Sept 6 2011

Hole 409: (0.81% copper equivalent) over an interval of 154.30m

Note: The mineralization in DDH CF409-2011 extended the higher-grade mineralization on this section an additional 147m to the east and confirms the mineralized nature of the chargeability anomaly identified in 2010. The mineralization on this section is open to the east, along strike and at depth,

408: 350m of 0.57% copper equivilent, including 76m of 0.70% copper equivilent

The 2011 drilling and assay results to date continue to confirm that the zone of higher-grade mineralization is associated with a 1,200m long by 600m wide chargeability anomaly located to the east of the Paramount zone

Sept 23 2011 : Copper Fox Extends Mineralized Zone to the East

Hole 410(1): (0.52% copper equivalent) over an interval of 250.75m

Hole 410(2): (0.78% copper equivalent) over a core interval of 24.68m

The mineralized interval in DDH CF410B-2011 is open to the east and confirms the mineralized nature of the chargeability anomaly identified in 2010,

Hole 399 and 401:

diamond drill hole (DDH) CF399 has extended the mineralization 175m to the east and 125m at depth. DDH CF401 has extended the mineralization a further 130m to the east and 100m at depth. The mineralization on both sections is open at depth and to the east,

- DDH CF399 intersected 0.39% copper, 0.10 g/t gold and 0.05% molybdenum and 2.09 g/t silver (0.67% copper equivalent) from 9.14m to 517.24m a core interval of 508.1m,

- DDH CF399 includes a higher grade interval of 0.45% copper, 0.33 g/t gold and 0.06% molybdenum and 3.01 g/t silver (0.94% copper equivalent) from 462.7m to 517.24m, a core interval of 54.5m at the bottom of the hole,

- DDH CF401 intersected 0.43% copper, 0.25g/t gold, 0.04% molybdenum and 2.40 g/t silver (0.75% copper equivalent) from 5.66m to 495.9m a core interval of 489.5m,

- DDH CF401 includes a higher grade interval of 0.66% copper, 0.50g/t gold, 0.04% molybdenum, 3.10 g/t silver (1.17% copper equivalent) from 345.4m to 429.2m, a core interval of 83.8m at the bottom of the hole, and

Holes 411 and 412

Diamond drill hole (DDH) CF411- (0.91% copper equivalent (CuEq)) over an interval of 387.8m starting at a core length of 287.0m.

NORTH PARAMOUNT

415: (1.10% copper equivalent) over an interval of 65.53m starting at a core length of 99.00m,

413: (0.65% copper equivalent) over an interval of 130.65m

Right side done, Left side UNTESTED

http://www.copperfoxmetals.com/s/Image.asp?i=maps/Interpreted-Cross-Section-6361000mN-Nov2011.jpg&id=491223

http://www.copperfoxmetals.com/s/Image.asp?i=maps/Interpreted-Cross-Section-6360800mN-Nov2011.jpg&id=491224

http://www.copperfoxmetals.com/s/Image.asp?i=maps/Interpreted-Cross-Section-6360650mN-November-2011.JPG&id=491789