Station Line From meters To meters Width meters Silver grams/tonne *XRF assay Silver grams/tonne Lead percent Zinc percent Copper percent Gold grams/tonne
40 17.25 17.90 0.65 7643 2311 18.55 0.54 0.45
50 15.80 17.15 1.35 3315 1420 17.55 0.18 0.22
including 16.80 17.15 0.35 9944 4775 45.10 0.35 0.67
60 14.60 17.90 3.30 4140 4003 17.27 0.21 0.58
including 14.60 15.70 1.10 8625 7821 41.17 0.25 0.97
including 16.85 17.50 0.65 5623 6514 18.41 0.30 1.12
70 13.05 14.30 1.25 2339 1128 6.18 0.24 0.22
15.95 16.15 0.20 5698 14,800 4.19 0.58 0.15
18.25 21.00 2.75 593 591 0.85 0.13 0.05
including 18.70 18.95 0.25 5379 2831 8.00 0.19 0.47
80 13.50 14.62 1.12 5518 6034 0.90 1.67 0.80
including 14.10 14.25 0.15 37,311 41,900 1.36 2.52 5.26 3.93

The Company also conducted a detailed surface trench sampling in the TM pit to dictate the initial first year mining pit quality control. During the trench sampling, two new 30 meter long high grade veins were determined. It was important note that this is the first occurrence of gold being present at the TM zone. The Company is currently conducting sampling of the high grade vein every two meters and will be reporting the XRF indicative results and laboratory assays when available. The following are the highlight laboratory assays from the TM trench samples and the comparative XRF insitu assays as reported on the July 29th news release:

ACME Analytical Laboratories Ltd. in Vancouver conducted sample preparation and analysis. Sample analysis was by 7AR and 7AR.1 digest, and analyzed by ICP-ES method. Over limit assays on silver and gold results are by G6 fire assay and gravimetric finish. Standard samples and blanks were used for quality assurance and quality control for sample analysis. Differences in assays reported on the July 29th news release are due to the inherent XRF Niton XL3T Analyser instrumentation error plus the differences between insitu sample analysis versus a homogenized laboratory sample assay. The Company would like to clarify that when reporting results from the XRF Niton XL3T Analyser, the assays are for indicative purposes only and should not be relied upon until comparative lab assays are completed. Widths are horizontal trench widths.

The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed by Don Wedman, P.Eng., President and Chief Executive Officer for CMC Metals Ltd., a qualified person under National Instrument 43-101.

This news release was prepared on behalf of the Board of Directors, which accepts full responsibility for its contents.

On behalf of the Board:

"Don Wedman" Don Wedman, P.Eng.

CEO

CMC METALS LTD.

For further information on the Company, please contact Mr. Gord Zelko, VP Business Relations at StoxNetwork Corp. Telephone: 250-495-7123, or Email: contact@stoxnetwork.com.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Copyright (c) 2009 Thenewswire.ca - All rights reserved.